The DSMC2® Gold Mount Battery Module Pro is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using standard Gold Mount batteries. The Gold Mount and protected release button ensure ongoing power even during mobile shoots.
This DSMC2 battery module offers a P-Tap connector on top and an auxiliary port on the side for powering peripherals and accessories. Together the P-Tap and auxiliary connectors support a maximum combined current of 3.8 Amps.
This module also offers a DC IN power port that can be used to power the camera system when the module is attached to the BRAIN. When DC IN power is supplied to the module, and the camera is turned off, this module can also trickle charge a wide variety of attached Gold Mount batteries.
Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a lightweight and space-saving form factor. The DSMC2 Gold Mount Battery Module Pro is an ideal power solution for use with most DSMC2 expanders. Alternatively, connect the DSMC2 Gold Mount Battery Module Pro directly to your DSMC2 BRAIN for a low-profile, battery-only power configuration.
|DIMENSIONS||Height: 4.57 in. (116.0 mm)
Width: 4.06 in. (103.2 mm)
Depth: 1.16 in. (29.4 mm)
|WEIGHT||0.674 lbs (306 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via rear pogo connector (13-Pin)
|CONNECTORS||DC IN (6-Pin 1B LEMO socket), P-Tap Aux Power output (2-Pin), 3.8 A shared, Aux Power output (2-Pin 0B LEMO), 3.8 A shared|
|BATTERY COMPATIBILITY||Standard Gold Mount batteries|
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware v6.3.102 or later|