The DSMC2® Jetpack Expander is specifically designed for aerial, gimbal, handheld, and other lightweight/remote configurations. This expander features standard connectors for power (DC-IN), CTRL, and SYNC for all of your Timecode and Genlock needs. In addition, the DSMC2 Jetpack Expander offers custom-tailored supports and connectors for HDMI and USB power out—perfect for housings and low-profile setups.
The DSMC2 Jetpack Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
The DSMC2 Jetpack-SDI Expander is also available, featuring an SDI output and GIG-E support for many aerial or other applications.
NOTE: Only one (1) expander module can be used at a time.
|DIMENSIONS||Height: 4.57 in. (116 mm)
Width: 3.54 in. (90 mm)
Depth: 1.46 in. (37 mm)
|WEIGHT||0.50 lbs (226.8 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via DSMC2 Rear pogo connector (13-Pin)
Communication via DSMC2 Rear I/O connector (4×40 Pin)
|CONNECTORS||DC IN (6-Pin 1B LEMO socket)
HDMI 1.2 output (Type A socket), 60 Hz max frame rate
USB Power output (Type A socket), 1.0 A
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
|AUTO BOOT ON POWER||2-position slider switch|
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|OPERATING HUMIDITY||0% to 85%, non-condensing|
|STORAGE HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware versions|