The DSMC2™ V-Lock Battery Module is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using RED BRICK® and third-party batteries. The V-Lock and protected release button ensure ongoing power even during mobile shoots.
This DSMC2 battery module also offers a P-Tap connector for powering peripherals and accessories. Located on the top of the module, the P-Tap connector supports a maximum current of 3.0 Amps.
Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a lightweight and space-saving form factor. The DSMC2 V-Lock Battery Module is an ideal power solution for use with most DSMC2 expanders. Alternatively, connect the DSMC2 V-Lock Battery Module directly to your DSMC2 BRAIN for a low-profile, battery-only power configuration.
|DIMENSIONS||Height: 4.57 in. (116.0 mm)
Width: 3.71 in. (94.3 mm)
Depth: 1.42 in. (36.0 mm)
|WEIGHT||0.79 lbs (356 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via rear pogo connector (13-Pin)|
|CONNECTORS||P-Tap Aux Power output (2-Pin), 3.0A|
|BATTERY COMPATIBILITY||RED BRICK and other standard V-Lock batteries|
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|OPERATING HUMIDITY||0% to 85%, non-condensing|
|STORAGE HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware v6.2 or later|