Shopping in United States?       Visit us.red.com

We have set cookies in your browser to help make this website better.

You can find more information about our use of cookies and how we protect your personal information in our   privacy policy .

Your web browser has problems displaying this site.

Make sure you are using the latest version of your browser or consider using   Download Google Chrome Google Chrome   or   Download Mozilla Firefox Mozilla Firefox .

REDLINK DEVELOPMENT KIT

The REDLINK™ Development Kit allows programmers to create custom applications to control their DSMC via mobile device, computer, or microcontroller. The kit contains a USB pre-loaded with the REDLINK SDK sample apps, as well as additional resources. Use the SDK, apps, and resources to create custom applications that allow you to adjust controls on the DSMC, including Record Start/Stop, Shutter Speed, White Balance, ISO, and programmable User Keys. You can also program your custom app to monitor the status of your camera settings.

Completing the REDLINK™ Development Kit is the REDLINK™ Bridge, a wireless module that allows apps to communicate with the DSMC through the REDLINK™ Command Protocol (RCP). Additionally, the REDLINK™ Bridge interfaces with the RED 3-AXIS LENS CONTROL SYSTEM’s T.H.C. (TACTICAL HAND CONTROLLER) to control focus and iris on Canon and Nikon lenses. The REDLINK™ Bridge attaches to the rear of the DSMC brain or compatible rear module, and supports a wireless communication range of approximately 50 ft.

Note: The REDLINK™ Bridge requires that the DSMC is on firmware v5.2.8 or later.

REDLINK BRIDGE
Wireless Standard1 802.11/b/g/n
Wireless Range2 Approximately 50 feet
Data Rates 1 Mbps to 72 Mbps
Network Modes3 Ad-Hoc mode
Infrastructure mode
Network Security WEP
Network Channels Channel 1 to Channel 11 (when connecting to a device)
Channel 1 to Channel 42 (when connecting to T.H.C.)
Output Connector 1x 0B 6-pin LEMO auxiliary connector
Dimensions Height (w/ antenna): 5.17" (13.1 cm)
Height (w/o antenna): 4.32" (11 cm)
Width: 2.95" (7.5 cm)
Depth: 1.06" (2.7 cm)
Weight 0.477 lbs (216 g)
Material Aluminum
Construction Machined
Coating Black anodized coating
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature –5°C to 60°C (–20°F to 140°F)
Operating Humidity Range 0% to 85%, non-condensing
Storage Humidity Range 0% to 85%, non-condensing
Typical Operating Power Dissipation 220 mA
Peak Operating Power Dissipation 300 mA

1The REDLINK Bridge is not a wireless access point.
2As with all wireless devices, the communication range may be affected by the environment and any radio frequency (RF) interference that may be present.
3Ad-Hoc and infrastructure modes cannot be used at the same time.

REDLINK Development Kit PACKAGING
Dimensions Height: 7.00" (17.78 cm)
Width: 6.50" (16.51 cm)
Depth: 2.50" (6.35 cm)
Weight 0.75 lbs (340 g)
$395.00

SKU#: 720-0028

page.available

Regulated Item

Quantity

 
Financing Available via SoCal Leasing
Applicable to US & Canadian Residents Only