BETA Build 15 (v2.2.1)
Release Date: 2008-04-02
Download

Build 15, RED ONE camera firmware v2.2.1 Apr 02, 2008

REDCODE 36 Quality setting, 3K 2:1 and 16:9 record resolution, Audio playback, Simultaneous RED-EVF, RED-LCD and HD-SDI/HDMI outputs, Shutter speed reporting in Degrees or 1/xx Sec format, Increased frame rate for 2K recording modes, Anamorphic 2:1 recording modes, Camera LOOK file export/import, Addition of root directory (.RDM) to digital media, Streamlined media formatting and Black Shading algorithms. False Color Focus meter

Installation Instructions for Build 15, RED ONE camera firmware v2.2.1

• Click on the 2.2.1 firmware download link at www.red.com/support web site

• Verify the folder ” build_15_red_one_v2.2.1 ” appears on your desktop

• Follow the instructions contained in the ” build_15_red_one_v2.2.1_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (value specific to camera) Build 15 Version 2.2.1

• Installation is now complete.

Note: After upgrading a BLACK SHADING calibration should be performed. Ensure the lens cap is in place and a formatted CF card is installed before starting a BLACK SHADING operation. Detailed instructions are contained in the Operations Guide.

Significant changes since Build 13.

• Addition of RECODE 36 Compression Quality Setting.

• Addition of 3K and 3K 2:1 record modes.

• On-camera audio playback (headphone, mini-XLR and HDMI)

• Increased frame rate (100+fps) for 2K recording modes.

• 2:1 lens Anamorphic (ANA) recording modes for 2K, 3K, 4K

• Support for simultaneous RED-EVF, RED-LCD and HD-SDI/HDMI outputs.

• MONITOR / ACTIVE parameter replaced by MONITOR / PREVIEW parameter

• Addition of Relative Shutter Speed control

• Shutter speed reporting in Degrees or 1/xx Sec format.

• Improved Shutter speed / angle reporting in SYNCRO and RELATIVE modes

• Shutter speed / angle outside requested value indicator.

• Enhancement of Frame Rate Ramping control.

• Varispeed settings remembered across power cycle

• Enhancement of Histograms to logarithmic based display.

• False Color Focus indicator (red edge highlight over monochrome)

• Camera LOOK file export/import to SD Card.

• Addition of root directory (.RDM) to digital media.

• Addition of full size _F QuickTime Reference Movie

• Adjusted QuickTime file so audio displays as discreet channels

• Streamlined media formatting algorithms.

• Rejection of unqualified media

• Enhanced Black Shading routine.

• Improved RED-DRIVE data synchronization

• Updated RED-EVF color and gamma calibration

• Changed EVF default to Dark Detail ON

• Change of fan default to AUTO (SILENT in record, otherwise VARIABLE)

• Resolution of D.C offset in audio recordings

• Change of Headphone level default to -6dB.

• User activation (re-activation) of +48V Phantom Power on power cycle. Note: Use of +48VPhantom Power not recommended unless using the new RED XLR-to-mini-XLR cable adaptor (single cable with integrated adaptor). Use of XLR-to-mini-XLR adaptor and mini-XLR-to-mini-XLR cable (an adaptor and a cable) should NOT be used. If you need this new XLR-to-mini-XLR cable adaptor, please contact RED for a replacement.

• Removal of User Guides A B C D

• Adjusted GUI to display D.C instead of A.C with 12V power sources.

• Clip Name and starting Timecode in status display on playback.

• Use meter reports in hours rather than minutes.

• Fixed image separation bug when in timelapse record.

Known firmware restrictions for Build 15, RED ONE v2.2.1

• GUI not available on HD PREVIEW outputs if LCD and EVF active.

• Exposure below 1/24th sec not available in TIMELAPSE menu.

• Zoom is not available during record for 4K resolutions.

• Timecode output not enabled on LEMO 5 pin connector.

• Audio and Timecode not present in HD-SDI outputs.

• End user may not edit the filename of a LOOK file.

• May not exchange LOOK files with REDALERT! or REDCINE.

• Audio playback in REDALERT! and REDCINE is not enabled.

• Noise may be present on +48V Phantom Power Output.

• 4K 16:9 recording not supported by REDALERT! or QuickTime applications.

• EVF blanks for 3 seconds exiting OPEN GATE in SYNC refresh mode.

• EVF blanks for 3 seconds after change in Project Resolution in SYNC refresh mode.

• EVF blanks for 3 seconds after exiting MAGNIFY in 4K resolution in SYNC refresh mode.

• EVF may blank for 3 seconds after Varispeed frame rate change in SYNC refresh mode.

• Safe Action / Safe Title not correctly positioned for ANA recordings

• _F QuickTime proxies not fully supported by QuickTime applications.

• 4K 16:9 _F, _H, _M and _P QuickTimes may crash QuickTime Player.

• Dual Link HD-SDI outputs replicate HD PREVIEW or PLAYBACK HD-SDI signal.

Copyright© 2008 RED Digital Cinema, All Rights Reserved.

---

BETA Build 14 (v2.0.3)
Release Date: 2008-02-07
Download

Build 14, RED ONE camera firmware v2.0.3 Feb 07 , 2008

Audio Playback, 3K 2:1 and 16:9 Record Resolutions, REDCODE 28 and REDCODE 36 Compression Quality Settings, Focus Overlay, Relative Shutter, Enhancements to Syncro Shutter, Frame Rate Ramping, Histograms.

Installation Instructions for Build 14, RED ONE camera firmware v2.0.3

• Click on the 2.0.3 firmware download link at www.red.com/support web site

• Verify the folder ” build_14_red_one_v2.0.3 ” appears on your desktop

• Follow the instructions contained in the ” build_14_red_one_v2.0.3_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (value specific to camera) Build 14 Version 2.0.3

• Installation is now complete.

Note: Following this firmware upgrade, unless upgrading from Build 12 or 13, a BLACK SHADING calibration MUST be performed. See User Guide for detailed instruction notes.

Significant changes since Build 13.

• Audio playback on camera (headphone, mini-XLR and HDMI)

• Addition of 3K and 3K 2:1 record modes.

• Addition of RECODE 36 Compression Quality Setting.

• Addition of full size _F QuickTime Reference Movie.

• Addition of Relative Shutter Speed control.

• Addition of AUTO fan mode (SILENT in record, otherwise VARIABLE)

• Enhancement of Syncro Shutter Speed adjustment control.

• Enhancement of Frame Rate Ramping control.

• Enhancement of Histograms to logarithmic based display.

• Enhancement of Headphone volume controls.

• Changed EVF default to Dark Detail ON

• Temporary removal of +48V Phantom Power mode

• Resolution of D.C offset in audio (relative to Build 14 V2.0.1 / 2.0.2)

Known firmware restrictions for Build 14, RED ONE v2.0.3

• Audio playback in RED-ALERT and RED-CINE is not enabled.

• Changing resolutions with VARISPEED enabled causes image tearing

• Look File menu in place but not enabled for file SAVE / RECALL

• 4K 16:9 recording not yet supported by RED ALERT or by QuickTime Player.

• 4K _F, _H, _M and _P QuickTimes created by camera may crash QuickTime Player.

• RED-LCD plus Preview HD-SDI monitor output simultaneously active not supported.

• RED-EVF, RED-LCD, Preview HD-SDI, HDMI simultaneously active not yet supported.

• Dual Link HD-SDI outputs always replicate 720p PREVIEW or PLAYBACK HD-SDI signal.

• Audio and Timecode not present in HD-SD outputs.

• Use meter reports in minutes rather than hours.

Copyright© 2008 RED Digital Cinema, All Rights Reserved.

---

BETA Build 13 (v1.8.8)
Release Date: 2008-01-18
Download

Build 13, RED ONE camera firmware v1.8.8 Jan 16, 2008

Resolution of audio hiss on boot up.

Installation Instructions for Build 13, RED ONE camera firmware v1.8.8

• Click on the 1.8.8 firmware download link at www.red.com/support web site

• Verify the folder ” build_12_red_one_v1.8.8 ” appears on your desktop

• Follow the instructions contained in the ” build_13_red_one_v.1.8.8_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (n/a or value specific to camera) Build 13 Version 1.8.8

• Installation is now complete.

Note: Following this firmware upgrade, a BLACK SHADING calibration MUST be performed. See User Guide for detailed instruction notes.

Significant changes since Build 12

• Resolution of audio hiss on camera boot up.d on request in status display.

Known firmware restrictions for Build 13, version v1.8.8

• 4K 2:1 at 29.97 is not supported with CF Card, only with RED-DRIVE.

• Audio playback on camera is not enabled.

• Audio playback in RED-ALERT and RED-CINE is not enabled.

• No variable gain limiter in headphone output (may sound quiet or clip).

• 4K recording is not yet supported by RED ALERT or by QuickTime Player.

• 4K _H, _M and _P QuickTimes created by camera crash QuickTime Player.

• RED-LCD plus Preview HD-SDI monitor output simultaneously active not supported.

• RED-EVF, RED-LCD, Preview HD-SDI, HDMI simultaneously active not yet supported.

• Dual Link HD-SDI outputs always replicate 720p PREVIEW or PLAYBACK HD-SDI signal.

• Audio and Timecode not present in HD-SDI or HDMI outputs.

• Use meter reports in minutes rather than hours.

• On boot up, n/a being reported as P.I.N number on camera s/n 001 – 100.

Copyright© 2007 RED Digital Cinema, All Rights Reserved.

---

BETA Build 12 (v1.8.6)
Release Date: 2007-12-24
Download

Build 12, RED ONE camera firmware v1.8.6 Dec 24 , 2007

Audio Recording and Metering, OPEN GATE mode for RED-EVF, SYNC Mode for RED-EVF, False Color and Zebra on HDMI and PVW HD-SDI, GMT Time and Day with Time Zone offset, Programmable GPIO’s, Interval and Trigger based TimeLapse, Frame Rate Ramping, Black Shading Calibration / Highlight Streak Suppression

Note: Unless upgrading from a previous version of Build 12, a BLACK SHADING calibration must be performed. This parameter is located in SYSTEM / MAINTENANCE. Ensure that the lens cap is in place and a formatted CF card is installed before starting a BLACK SHADING operation. More detailed instructions are contained in the System Menus section of the Operations Guide.

Installation Instructions for Build 12, RED ONE camera firmware Beta v1.8.6

• Click on the 1.8.6 firmware download link at www.red.com/support web site

• Verify the folder ” build_10_red_one_v1.8.6 ” appears on your desktop

• Follow the instructions contained in the ” build_11_red_one_v.1.8.6_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (n/a or value specific to camera) Build 12 Version 1.8.6

• Installation is now complete.

Note: Following this firmware upgrade, a BLACK SHADING calibration MUST be performed. See User Guide for detailed instruction notes.

Significant changes since Build 11.

• Audio recording and metering (playback on camera is currently not supported)

• Audio playback via QuickTime Reference Files and QuickTime Player / FCP.

• Addition of OPEN GATE mode for Viewfinder and other Monitor outputs

• Addition of False Color and Zebras to HDMI and PVW HD-SDI outputs.

• Removed SYSTEM/SETUP/RECORD MODE, returned to Checkbox enable for Varispeed

• Interval based TimeLapse.

• Frame rate ramping mode.

• Added GPIO programmability.

• Addition of SET TIME (Hours / Minutes / Seconds) in SETUP menus.

• Addition of TimeZone Offset to (GMT) time and day settings.

• Media directory now formatted as Camera Letter + Reel Number + Date.

• Addition of BACK SHADING (black level calibration) in MAINTENANCE

• Timecode displayed by QuickTime Player with QuickTime Reference movies created by camera at 50.00 and 59.97 fps Project Frame Rates corrected.

• TINT parameter reset to default value (0) on change of Color Temp value.

• Changed default timecode DISPLAY to TIME CODE ( time of day)

• Changed default FAN mode to VARIABLE.

• Deletion of Hours / Minutes / Seconds reset from TIMECODE menu.

• Deletion of 2.35 and 1.85a Frame Guides (2.39 a.k.a 2.40 and 1.85 are guides are available)

Additional significant changes since Build 10

• Addition of 29.97 fps Project Frame Rate for 4K 2:1 record resolution.

• Increased Varispeed range to 1 – 30 fps for 4K 2:1 record resolution.

• Increased data rate of 4K (16:9) recording mode.

• Increased data rate of 2K (16:9) recording mode.

• Addition of GPO tally at completion of STEP RECORD enabled in TIMELAPSE

Additional significant changes since Build 9.

• Support for RED-EVF plus Preview HD-SDI / HDMI output simultaneously active.

• Addition of user selectable Video or Video + GUI monitoring modes on RED-LCD.

• Addition of 2K 2:1 recording mode.

• Addition of 50.00 and 59.94 Project Frame Rates for 2K and 2K 2:1 recording modes.

• Addition of 50 fps / 60 fps selection for HD-SDI outputs (720p/50 or 720p/59.94)

• Addition of GPI trigger enabled TIMELAPSE (one shot) recording.

• Addition of GPI trigger enabled RECORD and GPO external tally output signals.

• Addition of RGB COMPOSITE or LUMINANCE Histogram in default GUI display.

• Addition of RGB Channel Exposure Meter in default GUI display.

• Addition of SPOT EXPOSURE meter in METER selection in VIDEO/AV MENU/VIEWFINDER.

• Addition of DARK DETAIL mode for RED-EVF

• Addition of SYNCED or FIXED refresh rates for RED-EVF in SYSTEM/MONITOR.

• Addition of RECORD MODE parameter (NORMAL / VARISPEED / TIMELAPSE) in SETUP.

• Addition of enable checkbox for USER 1 and USER 2 keys in KEYMAP submenu.

• Addition of VARIABLE fan speed mode to SYSTEM/SETUP/MAINTANCE/FAN.

Additional significant changes since Build 8.

• Playback of recorded clips on camera.

• Cue to beginning of existing clips, step through recorded clip list

• Normal, Fast Forward and Reverse playback.

• Addition of Simple Exposure Meter – indicates clipping in R G B channels

• Enhanced Focus Assist Algorithm with adjustable sample window

• Enhanced False Color Exposure Meter with new Skin Tone indication (Pink band)

• Toggle of METERS ON/OFF by User Key of RED-EVF

• Toggle of COLOR ON/OFF by User Key of RED-EVF

• Simplified VIEWFINDER menu structure.

• Change to project logic. Change of Resolution no longer forces New Project.

• Improved Accuracy of Time Code when not in Jam Sync (external reference) mode

• Fixed Edge Code reporting as 1.00.00.000 on power cycle

• Camera log file created on media unmount

• PIN, Build and Version data reported on request in status display

• Use meter data reported on request in status display

Known firmware restrictions for Build 12, RED ONE v1.8.6

• Audio playback on camera is not enabled

• Audio playback in RED-ALERT and RED-CINE is not enabled.

• No variable gain limiter in headphone output (may sound quiet or clip)

• 4K recording is not yet supported by RED ALERT or by QuickTime Player.

• 4K _H, _M and _P QuickTimes created by camera crash QuickTime Player.

• RED-LCD plus Preview HD-SDI monitor output simultaneously active not supported.

• RED-EVF, RED-LCD, Preview HD-SDI, HDMI simultaneously active not yet supported.

• Dual Link HD-SDI outputs always replicate 720p PREVIEW or PLAYBACK HD-SDI signal.

• Audio and Timecode not present in HD-SDI or HDMI outputs

• RGB Channel Exposure Meter viewed on HDMI monitor has erratic behavior.

• Use meter reports in minutes rather than hours.

• Possibility of n/a being reported as P.I.N number on boot up.

Copyright© 2007 RED Digital Cinema, All Rights Reserved.

---

BETA Build 11 (v1.7.0)
Release Date: 2007-11-30
Download

Build 11, RED ONE camera firmware v1.7.0 Nov 30, 2007

Increased data rate for 4K and 2K record resolutions, 29.97 Project Frame Rate for 4K 2:1. 1 – 30 fps Variable Frame Rate for 4K 2:1, Step Record GPO tally for STEP RECORD in Timelapse mode.

Installation Instructions for BETA Build 11, RED ONE camera firmware v1.7.0

• Click on the 1.7.0 firmware download link at www.red.com/support web site

• Verify the folder ” build_10_red_one_v1.7.0 ” appears on your desktop

• Follow the instructions contained in the ” build_11_red_one_v.1.7.0_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (n/a or value specific to camera) Build 11 Version 1.7.0

• Installation is now complete.

h3.Significant changes since Build 10, RED ONE v1.6.4

• Added 29.97 fps Project Frame Rate for 4K 2:1 record resolution.

• Increased Varispeed range to 1 – 30 fps for 4K 2:1 record resolution.

• Increased data rate of 4K (16:9) recording mode.

• Increased data rate of 2K (16:9) recording mode.

• Addition of GPO tally at completion of STEP RECORD enabled in TIMELAPSE

• Change to SYNCED refresh mode as default for RED-EVF.

Known firmware restrictions for Build 11, RED ONE v 1.7.0

• Varispeed recording must first be enabled in SYSTEM/SETUP/RECORD MODE

• Open Gate function in VIDEO/AV MENU/VIEWFINDER is not operational

• INTERVAL (a.k.a CONTINUOUS) mode in Timelapse is not operational

• Timecode displayed by QuickTime Player with QUickTime Reference movies created by camera under 50.00 and 59.97 fps Project Frame Rates incorrect.

• 4K recording is not yet supported by RED ALERT or by QuickTime Player.

• 4K _H, _M and _P QuickTimes created by camera crash QuickTime Player.

• RED-LCD plus Preview HD-SDI monitor output simultaneously active not supported.

• RED-EVF, RED-LCD, Preview HD-SDI, HDMI simultaneously active not yet supported.

• Frame rate ramping is not supported in this release.

• Audio recording, monitoring or playback are not supported in this release.

• Dual Link HD-SDI outputs always replicate 720p PREVIEW or PLAYBACK HD-SDI signal.

• Not all frame guides selectable within each record resolution are enabled.

• RGB Channel Exposure Meter viewed on HDMI monitor may exhibit erratic behavior.

• Cannot reset Hours / Minutes / Seconds in TIMECODE menus.

• Possibility of n/a being reported as P.I.N number on boot up.

Other notes:

• On cameras 1 – 50 the stenciling for the four DIN connectors that provide dual link HD-SDI, Preview HD-SDI and Genlock outputs is incorrect. These should be dual link HD-SDI at the top left / top right, Preview HD-SDI at the lower left and Genlock at the lower right.

• 4K (16:9) recording is enabled in this build, and is supported by REDCINE on both Macintosh OSX and Windows XP platforms. At the time of this software release, 4K QuickTime reference movies created by the camera will crash QuickTime Player and RED ALERT is not compatible with 4K (16:9) recordings. Therefore treat with due caution, especially for commercial jobs.

Copyright© 2007 RED Digital Cinema, All Rights Reserved.

---

BETA Build 10 (v1.6.4)
Release Date: 2007-11-22
Download

Build 10, RED ONE camera firmware v1.6.4 Nov 22, 2007

Faster Boot Times. New 2K 2:1 record mode, Increased data rate for 2K record resolutions, new 50.00 and 59.94 Project Frame Rates, simultaneous EVF and PREVIEW / HDMI monitor outputs, Video or Video + Menus switch for RED-LCD, Dropped Frame Meter, RGB Channel Exposure Meter, GPI trigger and GPO tally, preliminary Timelapse mode

Installation Instructions for Build 10, RED ONE camera firmware v1.6.4

• Click on the 1.6.4 firmware download link at www.red.com/support web site

• Verify the folder ” build_10_red_one_v1.6.4 ” appears on your desktop

• Follow the instructions contained in the ” build_10_red_one_v16.4_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (n/a or value specific to camera) Build 10 Version 1.6.4

• Installation is now complete.

Significant changes since Build 9, RED ONE v1.5.1

• Support for RED-EVF plus Preview HD-SDI / HDMI output simultaneously active.

• Addition of user selectable Video or Video + GUI monitoring modes on RED-LCD.

• Addition of 2K 2:1 recording mode.

• Addition of 50.00 and 59.94 Project Frame Rates for 2K and 2K 2:1 recording modes.

• Addition of 50 fps / 60 fps selection for HD-SDI outputs (720p/50 or 720p/59.94)

• Addition of GPI trigger enabled TIMELAPSE (one shot) recording.

• Addition of GPI trigger enabled RECORD and GPO external tally output signals.

• Addition of RGB COMPOSITE or LUMINANCE Histogram in default GUI display.

• Addition of RGB Channel Exposure Meter in default GUI display.

• Addition of SPOT EXPOSURE meter in METER selection in VIDEO/AV MENU/VIEWFINDER.

• Addition of DARK DETAIL mode for RED-EVF

• Addition of SYNCED or FIXED refresh rates for RED-EVF in SYSTEM/MONITOR.

• Addition of RECORD MODE parameter (NORMAL / VARISPEED / TIMELAPSE) in SETUP.

• Addition of enable checkbox for USER 1 and USER 2 keys in KEYMAP submenu.

• Addition of VARIABLE fan speed mode to SYSTEM/SETUP/MAINTANCE/FAN.

Known firmware restrictions for Build 10, RED ONE v 1.6.4

• 4K recording is not yet supported by RED ALERT or by QuickTime Player.

• 4K _H, _M and _P QuickTimes created by camera crash QuickTime Player.

• RED-LCD plus Preview HD-SDI monitor output simultaneously active not supported.

• RED-EVF, RED-LCD, Preview HD-SDI, HDMI simultaneously active not yet supported.

• Frame rate ramping is not supported in this release.

• Intervalometer based Timelapse recording is in the menus but not yet enabled.

• Varispeed recording must first be enabled in SYSTEM/SETUP/RECORD MODE

• Open Gate function in VIDEO/AV MENU/VIEWFINDER is not operational

• Incorrect timecode displayed by QuickTime Player using QuickTime reference movies created by camera when in 50.00 and 59.95 Project Frame Rates

• Project Frame Rate at 29.97 for 4K and 4K 2:1 record is not operational

• Audio recording, monitoring or playback are not supported in this release.

• Dual Link HD-SDI outputs always replicate 720p PREVIEW or PLAYBACK HD-SDI signal.

• Not all frame guides selectable within each record resolution are enabled.

• RGB Channel Exposure Meter viewed on HDMI monitor may exhibit erratic behavior.

• Cannot reset Hours / Minutes / Seconds in TIMECODE menus.

• Possibility of n/a being reported as P.I.N number on boot up.

Other notes:

• On cameras 1 – 50 the stenciling for the four DIN connectors that provide dual link HD-SDI, Preview HD-SDI and Genlock outputs is incorrect. These should be dual link HD-SDI at the top left / top right, Preview HD-SDI at the lower left and Genlock at the lower right.

• 4K (16:9) recording is enabled in this build, and is supported by REDCINE on both Macintosh OSX and Windows XP platforms. At the time of this software release, 4K QuickTime reference movies created by the camera will crash QuickTime Player and RED ALERT is not compatible with 4K (16:9) recordings. Therefore treat with due caution, especially for commercial jobs.

Copyright© 2007 RED Digital Cinema, All Rights Reserved.

---

BETA Build 9 (v1.5.1)
Release Date: 2007-11-06
Download

BETA Build 9, RED ONE camera firmware v1.5.1 Nov 02, 2007

New Items: Clip Playback via RED-EVF, RED-LCD, PREVIEW or HDMI monitor outputs. Simple Exposure Meter, Enhanced Focus Assist, Enhanced False Color Mapping. Various debug issues – Record from Play, Adjustable Focus Assist Bar etc.

Installation Instructions for Build 9, RED ONE camera firmware v1.5.1

• Click on the 1.5.1 firmware download link at www.red.com/support web site

• Verify the folder ” build_9_red_one_v1.5.1 ” appears on your desktop

• Follow the instructions contained in the ” build_9_red_one_v1.5.1_readme ” file included in that folder.

• On power up, verify the camera rear status reports back

  PIN (n/a or value specific to camera) Build 9 Version 1.5.1

• Installation is now complete.

Bug fixes since BETA Build 9, RED ONE v1.5.0

• Removed Image Analysis from Playback mode to prevent camera lock-up

• Pressing RECORD while in Playback forces an immediate clip Record

• Removed Auto Contrast Mode from RED-EVF.

• Focus Assist Bar location is adjustable from Joystick

Significant changes since Build 8, RED ONE v1.3.5 released Oct 18, 2007

• Playback of recorded clips on camera.

• Cue to beginning of existing clips, step through recorded clip list

• Normal, Fast Forward and Reverse playback.

• Addition of Simple Exposure Meter – indicates clipping in R G B channels

• Enhanced Focus Assist Algorithm with adjustable sample window

• Enhanced False Color Exposure Meter with new Skin Tone indication (Pink band)

• Toggle of METERS ON/OFF by User Key of RED-EVF

• Toggle of COLOR ON/OFF by User Key of RED-EVF

• Simplified VIEWFINDER menu structure.

• Change to project logic. Change of Resolution no longer forces New Project.

• Improved Accuracy of Time Code when not in Jam Sync (external reference) mode

• Fixed Edge Code reporting as 1.00.00.000 on power cycle

• Camera log file created on media unmount

• PIN, Build and Version data reported on request in status display

• Use hour meter data reported on request in status display

Known firmware restrictions for Build 9, RED ONE v 1.5.1

• Clips recorded on other cameras or with earlier builds may not play back

• Histograms scale incorrectly when a percentage of pixels clip.

• 4K recording is not yet supported by RED ALERT or by QuickTime Player.

• 4K _H, _M and _P QuickTime files created by camera crash QuickTime Player.

• Two or more monitor outputs simultaneously active is not yet supported.

• Frame rate ramping is not supported in this release.

• TimeLapse is not supported in this release.

• Audio is not supported in this release.

• Dual LInk HD-SDI outputs always replicate PREVIEW HD-SDI signal.

• Not all frame guides selectable in each record resolution are enabled.

• Scaling of waveform meters is not optimized (preliminary implementation)

• Possibility of n/a being reported as P.I.N number on boot up.

Other notes:

• On cameras 1 – 50 the stenciling for the four DIN connectors that provide dual link HD-SDI, Preview HD-SDI and Genlock outputs is incorrect. These should be dual link HD-SDI at the top left / top right, Preview HD-SDI at the lower left and Genlock at the lower right.

• 4K (16:9 aspect ratio) recording is enabled in this build, however RED ALERT playback software is yet available for 4K (16:9) Therefore treat with due caution, this recording mode is not recommended for commercial jobs. 4K QuickTime reference movies are created by the camera, these permit in-field review of the clips until such time as an updated RED ALERT is available.

Copyright© 2007 RED Digital Cinema, All Rights Reserved.