Designed for professional shooting configurations, the DSMC2® Production Module (Gold Mount) mounts directly to the BRAIN® and offers a comprehensive array of video, power, communication, and pro audio connections. Constructed from lightweight and durable aluminum alloy, this module incorporates an industry standard Gold Mount mount to power your DSMC2 camera when using standard Gold Mount batteries.
The Production Module includes three BNC video connectors for maximum monitoring flexibility on-set. Two connectors output a cloned 3G-SDI signal, and one connector serves as an independent monitoring output.
To support production demands for on-board monitors, wireless video transmitters, wireless lens control, and focus assist systems, the module includes multiple auxiliary power outputs:
- Two front-facing 3-Pin Fischer R/S ports support Remote Start/Stop functionality, and provide 24V power out up to a combined 2.5 Amps.
- A front-facing 2-Pin 0B AUX PWR port provides power out up to 3.0 Amps.
- A 2-Pin P-Tap connector on the top provides power out up to 3.0 Amps.
- A rear-facing USB 2.0 port with support for fast charging offers 5V at 1.5 Amps for powering small mobile devices.
Two standard 3-pin XLRs with preamplifiers are included for most professional audio needs. Each XLR input features a 3-position selector switch to designate the incoming audio signal type: Balanced Line Level, Balanced Mic Level, and Balanced Mic with +48V phantom power. Additionally, a 3.5mm line-level headphone jack allows users to monitor audio during takes and in playback mode.
The module features ports for power in (DC IN), Genlock (BNC), Timecode (5-pin 0B), GIG-E, and CTRL.
The module also features a selector switch that enables the BRAIN to automatically boot when power is provided via the DC IN connector on the module. This feature allows operators to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
|DIMENSIONS||Height: 4.6 in. (116.0 mm)|
Width: 5.6 in. (142.2 mm)
Depth: 3.7 in. (93.0 mm) (connected to BRAIN)
|WEIGHT||Approx. 2.0 lbs (907.2 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via Rear pogo connector (13-Pin)|
Communication via Rear I/O connector (4x40 Pin)
|CONNECTORS||2x 3G-SDI outputs (75 Ω BNC), 60 Hz max frame rate|
Monitor output (75 Ω BNC), 60 Hz max frame rate
2x 24V Aux Power / Remote Start/Stop Outputs (3-Pin Fischer), 2.5A Shared
Aux Power Output (2-Pin 0B), 3.0A
Aux Power Output (2-Pin P-Tap), 3.0A
DC IN (6-Pin 1B socket)
2x Balanced Audio inputs (3-Pin, full size XLR female)
Stereo Headphone output (3.5 mm jack)
Timecode (5-pin 0B)
Genlock input (75 Ω BNC)
Gigabit Ethernet input/output (9-Pin 0B)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00)
USB Power output (Type A socket), 1.5A
|AUTO BOOT ON POWER||2-position slider switch|
|AUDIO 1||Dual 3-pin XLRs with preamplifiers, uncompressed, 24-bit, 48 KHz|
Input Formats: Balanced Line, Balanced Mic (w/o Phantom Power), Balanced Mic (w/ 48 V Phantom Power)
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|OPERATING HUMIDITY||0% to 85%, non-condensing|
|STORAGE HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware v7.2.4 or later.|
*Commercial ("Business") Financing provided by Currency Capital, LLC and loans made or arranged pursuant to California Finance Lenders Law license number 60DBO-56173. Loans are subject to credit approval and monthly payments illustrated above are based on terms available to highest qualified candidates and subject to additional documentation and prefunding fees, terms and conditions. Currency Capital, LLC is an independent finance company and is not the manufacturer or supplier of any equipment. Currency Capital, LLC is not a consumer lender and any consumer financing will be referred to a consumer lender.