Designed for professional shooting configurations, the DSMC2® Production Module (V-Lock) mounts directly to the BRAIN® and offers a comprehensive array of video, power, communication, and pro audio connections. Constructed from lightweight and durable aluminum alloy, this module incorporates an industry standard V-Lock mount to power your DSMC2 camera when using RED BRICK®, REDVOLT-V™, or other V-Lock batteries.
The Production Module includes three BNC video connectors for maximum monitoring flexibility on-set. Two connectors output a cloned 3G-SDI signal, and one connector serves as an independent monitoring output.
To support production demands for on-board monitors, wireless video transmitters, wireless lens control, and focus assist systems, the module includes multiple auxiliary power outputs:
- Two front-facing 3-Pin Fischer R/S ports support Remote Start/Stop functionality, and provide 24V power out up to a combined 2.5 Amps.
- A front-facing 2-Pin 0B AUX PWR port provides power out up to 3.0 Amps.
- A 2-Pin P-Tap connector on the top provides power out up to 3.0 Amps.
- A rear-facing USB 2.0 port with support for fast charging offers 5V at 1.5 Amps for powering small mobile devices.
Two standard 3-pin XLRs with preamplifiers are included for most professional audio needs. Each XLR input features a 3-position selector switch to designate the incoming audio signal type: Balanced Line Level, Balanced Mic Level, and Balanced Mic with +48V phantom power. Additionally, a 3.5mm line-level headphone jack allows users to monitor audio during takes and in playback mode.
The module features ports for power in (DC IN), Genlock (BNC), Timecode (5-pin 0B), GIG-E, and CTRL.
The module also features a selector switch that enables the BRAIN to automatically boot when power is provided via the DC IN connector on the module. This feature allows operators to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
|DIMENSIONS||Height: 4.57 in. (116.0 mm)|
Width: 5.38 in. (136.7 mm)
Depth: 3.42 in. (86.8 mm) (connected to BRAIN)
|WEIGHT||Approx. 2.0 lbs (907.2 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via Rear pogo connector (13-Pin)|
Communication via Rear I/O connector (4x40 Pin)
|CONNECTORS||2x 3G-SDI outputs (75 Ω BNC), 60 Hz max frame rate|
Monitor output (75 Ω BNC), 60 Hz max frame rate
2x 24V Aux Power / Remote Start/Stop Outputs (3-Pin Fischer), 2.5A Shared
Aux Power Output (2-Pin 0B), 3.0A
Aux Power Output (2-Pin P-Tap), 3.0A
DC IN (6-Pin 1B socket)
2x Balanced Audio inputs (3-Pin, full size XLR female)
Stereo Headphone output (3.5 mm jack)
Timecode (5-pin 0B)
Genlock input (75 Ω BNC)
Gigabit Ethernet input/output (9-Pin 0B)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00)
USB Power output (Type A socket), 1.5A
|AUTO BOOT ON POWER||2-position slider switch|
|AUDIO 1||Dual 3-pin XLRs with preamplifiers, uncompressed, 24-bit, 48 KHz|
Input Formats: Balanced Line, Balanced Mic (w/o Phantom Power), Balanced Mic (w/ 48 V Phantom Power)
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|OPERATING HUMIDITY||0% to 85%, non-condensing|
|STORAGE HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware v7.2 or later.|