Shopping in United States?       Visit us.red.com

We have set cookies in your browser to help make this website better.

You can find more information about our use of cookies and how we protect your personal information in our   privacy policy .

Your web browser has problems displaying this site.

Make sure you are using the latest version of your browser or consider using   Download Google Chrome Google Chrome   or   Download Mozilla Firefox Mozilla Firefox .

Downloads



Download

SCARLET-W Firmware
Release History




SCARLET-W Firmware

Release Date: 12/08/2016
Version: 6.3.57

DSMC Release Build v6.3.57 December 8, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.57.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.57.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.57.
  • You cannot downgrade a WEAPON, EPIC-W, SCARLET-W or RED RAVEN to earlier than v6.2.64 or v6.3.38 after upgrading to v6.3.57.
  • You must upgrade your REDMOTE firmware to v9.6.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.3.57.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.3.57

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.3.27

  • Added EPIC-W support
  • Added Motion Mount support for HELIUM sensor
  • Fixed WEAPON HELIUM intermittent startup failure (DSMC2 only)
  • Fixed WEAPON 8K camera playback stutter (DSMC2 only)
  • Fixed WEAPON HELIUM blackshade failure for exposures greater than 1/24 (DSMC2 only)
  • Fixed WEAPON HELIUM HDRx X track exposure (DSMC2 only)
  • Fixed Tethering support with Jetpack-SDI (DSMC2 only)
  • Fixed HD-SDI output with genlock on startup (DSMC2 only)
  • Fixed HD-SDI split screen at 60Hz (DSMC2 only)
  • Fixed distorted image with 5.5K 4:1/8:1 with Lookaround (DSMC2 only)
  • Fixed playback with 6K FF with Lookaround and QT 2K 4444XQ (DSMC2 only)
  • Fixed image artifacts in 6K FF 2:1 and WS formats with lookaround and QT 4444 or 4444XQ (DSMC2 only)
  • Fixed image artifacts in 7.5K WS format and QT 4444XQ (DSMC2 only)
  • Fixed swapped audio channels on DSMC brain (DSMC only)
  • Fixed blank LCD during magnify with REDCAST module (DSMC only)
  • Fixed no REDCAST SDI out after reboot in AUTO mode (DSMC only)
  • Fixed progress bar when secure formatting media (DSMC only)
  • Fixed blue tint with Motion Mount and Standard OLPF (DSMC only)
  • Fixed playback freeze with REDCAST and active genlock (DSMC only)
  • Fixed REDCAST HD-SDI output after format change (DSMC only)
  • Fixed diagonal tear with RED Touch 7" and 4.7" LCD
  • Fixed image stutter on startup with RED Touch 9" LCD
  • Fixed numerical value text in Audio Mixer UI
  • Fixed stale spinner values after editing custom list
  • Fixed non-functional left side record button in Still mode
  • Fixed empty custom resolution list
  • Fixed control of timecode out with LTC Out checkbox
  • Fixed spinner when custom aperture value is added
  • Fixed stale aperture metadata information in R3D
  • Fixed black LCD screen with changing formats with Auto Hide enabled
  • Fixed far focus distance value always equal to focus distance in metadata
  • Fixed display priority with only EVF attached
  • Fixed distance slider bar after ‘Init Lens’ operation
  • Fixed clip duration time with pre-record

OPERATIONAL NOTES SPECIFIC TO BUILD v6.3.57

  • Secure Format media before using Pre-Record.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

15.4 MB    




SCARLET-W Firmware

Release Date: 07/29/2016
Version: 6.3.27

DSMC Release Build v6.3.27 July 29, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.27.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.27.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.27.
  • You cannot downgrade a WEAPON, SCARLET-W or RED RAVEN to earlier than v6.2.63 or v6.3.27 after upgrading to v6.3.27.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.3.27.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.3.27

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.3.17

  • Added 8K S35 HELIUM sensor support
  • Added 8K VV DRAGON sensor support
  • Added 8K VV Anamorphic DRAGON sensor support
  • Added DSMC2 REDVOLT Expander support
  • Added DSMC2 V-Lock Battery Module support
  • Added DSMC2 JETPACK-SDI Expander support
  • Added REDMOTE v9.6.28 (DSMC only)
  • Added RED 512GB V6 support
  • Fixed WEAPON 8K VV black sun artifact (DSMC2 only)
  • Fixed Apple ProRes playback with 4 channels of audio (DSMC2 only)
  • Fixed Apple ProRes playback audio synchronization (DSMC2 only)
  • Fixed incorrect Apple ProRes frame rate in Open Gate mode (DSMC2 only)
  • Fixed magnify issue with Apple ProRes 4444 and 444XQ (DSMC2 only)
  • Fixed framed overlay/auto hide menus for mirrored monitor
  • Fixed random cursor movement in playlist moving multiple clips
  • Fixed camera freeze in playback with auto-hide menu and custom overlay
  • Fixed blank RED Touch 7" LCD on startup
  • Fixed record start failure with HDRx at 2K WS 1fps
  • Fixed invalid Power In information after battery swap

OPERATIONAL NOTES SPECIFIC TO BUILD v6.3.27

  • Secure Format media before using Pre-Record.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

15.7 MB    




SCARLET-W Firmware

Release Date: 06/23/2016
Version: 6.3.17

DSMC Release Build v6.3.17 June 23, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.17.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.17.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.3.17.
  • You cannot downgrade a WEAPON CF to earlier than v6.1.52, v6.2.60 or v6.3.17 after upgrading to v6.3.17.
  • You cannot downgrade a WEAPON MG, SCARLET-W or RED RAVEN to earlier than v6.2.60 or v6.3.17 after upgrading to v6.3.17.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.3.17.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.3.17

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.3.10

  • Added WiFi static IP support for WEAPON and REDLINK Bridge
  • Added RED 512GB V5 support
  • Improved Nikon Iris control
  • Fixed Apple ProRes and Avid DNxHD/HR audio in Open Gate mode (DSMC2 only)
  • Fixed calibration ISO for WEAPON 6K STH OLPF (DSMC2 only)
  • Fixed frame guides with playback and ProRes files (DSMC2 only)
  • Fixed inability to playback ProRes file after an R3D clip (DSMC2 only)
  • Fixed monitor output with 6K FF 1.25x ANA and Avid DNxHR/HD 4K mode (DSMC2 only)
  • Fixed playback of 6K 3:2 1.3x ANA ProRes clips (DSMC2 only)
  • Fixed intermittent media mount failure on startup or hot plug (DSMC2 only)
  • Fixed HD-SDI stutter in R3D record mode (DSMC2 only)
  • Fixed HD-SDI vertical scroll in 4K 3:2 1.3x ANA with Lookaround (DSMC2 only)
  • Fixed playback screen with REDCAST after changing Output Mode (DSMC only)
  • Fixed black image switching resolution with Avid DNx 444 (DSMC2 only)
  • Fixed invalid battery status with ET battery modules (DSMC2 only)
  • Fixed RED RAVEN black sun artifact (DSMC2 only)
  • Fixed RED Touch 4.7" LCD diagonal tear exiting magnify
  • Fixed RED Touch 4.7" LCD frozen screen entering magnify
  • Fixed WiFi connect button when connecting/disconnecting
  • Fixed 1 frame delay using Internal Timelapse Timer
  • Fixed Canon Motion Mount ND operation
  • Fixed Exposure Tool for ISO > 800
  • Fixed Green and Blue curve adjustment values in R3D metadata
  • Fixed max fan speed in adaptive modes
  • Fixed Monitor priority list in UI
  • Removed AWB in playback
  • Removed genlock selection in Sensor Sync Mode dialog when no genlock input is present
  • Removed genlock source selection for all WEAPON cameras (DSMC2 only)

OPERATIONAL NOTES SPECIFIC TO BUILD v6.3.17

  • Secure Format media before using Pre-Record.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

15.7 MB    




SCARLET-W Firmware

Release Date: 07/29/2016
Version: 6.2.63

DSMC Release Build v6.2.63 July 29, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.63.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.63.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.63.
  • You cannot downgrade a WEAPON, SCARLET-W or RED RAVEN to earlier than v6.2.63 or v6.3.27 after upgrading to v6.2.63.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the RED DSMC Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.2.63.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.2.63

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or RED STATION REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.60

  • Added DSMC2 REDVOLT Expander support
  • Added DSMC2 V-Lock Battery Module support
  • Added DSMC2 JETPACK-SDI Expander support
  • Added RED 512GB V6 support
  • Fixed magnify issue with Apple ProRes 4444 and 444XQ (DSMC2 only)
  • Fixed record start failure with HDRx at 2K WS 1fps
  • Fixed invalid Power In information after battery swap

OPERATIONAL NOTES SPECIFIC TO BUILD v6.2.63

  • ProRes only playback is not supported
  • Secure Format media before using Pre-Record.
  • Please perform an Auto-Cal after upgrading from v6.1.6.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

18.0 MB    




SCARLET-W Firmware

Release Date: 06/23/2016
Version: 6.2.60

DSMC Release Build v6.2.60 June 23, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.60.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.60.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.60.
  • You cannot downgrade a WEAPON CF to earlier than v6.1.52 or v6.2.60 after upgrading to v6.2.60.
  • You cannot downgrade a WEAPON MG, SCARLET-W or RED RAVEN to earlier than v6.2.60 after upgrading to v6.2.60.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the RED DSMC Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.2.60.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.2.60

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or RED STATION REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.57

  • Added RED 512GB V5 support
  • Fixed HD-SDI vertical scroll in 4K 3:2 1.3x ANA with Lookaround (DSMC2 only)
  • Fixed HD-SDI stutter in R3D record mode (DSMC2 only)
  • Fixed ‘ProRes Disabled’ check after media inserted (DSMC2 only)
  • Fixed intermittent media mount failure on startup or hot plug (DSMC2 only)
  • Fixed invalid battery status with ET battery modules (DSMC2 only)
  • Fixed RED RAVEN black sun artifact (DSMC2 only)
  • Fixed 1 frame delay using Internal Timelapse Timer
  • Fixed Green and Blue curve adjustment values in R3D metadata
  • Fixed max fan speed in adaptive modes

OPERATIONAL NOTES SPECIFIC TO BUILD v6.2.60

  • ProRes only playback is not supported
  • Secure Format media before using Pre-Record.
  • Please perform an Auto-Cal after upgrading from v6.1.6.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

18.0 MB    




SCARLET-W Firmware

Release Date: 05/17/2016
Version: 6.2.57

DSMC Release Build v6.2.57 May 17, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.57.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.57.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.57.
  • You cannot downgrade a WEAPON CF to earlier than v6.1.50 or v6.2.57 after upgrading to v6.2.57.
  • You cannot downgrade a WEAPON MG, SCARLET-W or RED RAVEN to earlier than v6.2.57 after upgrading to v6.2.57.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the RED DSMC Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.2.57.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.2.57

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or RED STATION REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.55

  • Added flip video support in R3D metadata
  • Fixed audio output disabled after setting Headphone Volume to -dB value (DSMC2 only)
  • Fixed Base Expander distorted live audio after playback (DSMC2 only)
  • Fixed invalid Apple ProRes and Avid DNx clips recording 6K Full Frame at 82.81fps (DSMC2 only)
  • Fixed horizontal split in monitor at max frame rates in 6K/5K formats (DSMC2 only)
  • Fixed repeated columns in right side of monitor (DSMC2 only)
  • Fixed HD-SDI cutout in playback with genlock
  • Fixed HD-SDI flip/mirror with genlock
  • Fixed HD-SDI test pattern output with genlock
  • Fixed UI Flip/Mirror setting not saved across boots
  • Fixed incorrect Gamma Space indication on Histogram during playback
  • Fixed incorrect clip count returned in MEDACLPC when playlist exists

OPERATIONAL NOTES SPECIFIC TO BUILD v6.2.57

  • ProRes only playback is not supported
  • Secure Format media before using Pre-Record.
  • Please perform an Auto-Cal after upgrading from v6.1.6.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

17.8 MB    




SCARLET-W Firmware

Release Date: 04/13/2016
Version: 6.2.55

DSMC Release Build v6.2.55 April 13, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.55.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.55.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.55.
  • You cannot downgrade a WEAPON CF to earlier than v6.1.44 or v6.2.25 after upgrading to v6.2.55.
  • You cannot downgrade a WEAPON MG or SCARLET-W to earlier than v6.2.44 after upgrading to v6.2.55.
  • You cannot downgrade a RED RAVEN to earlier than v6.2.51 after upgrading to v6.2.55.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the RED DSMC Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.2.55.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.2.55

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or RED STATION REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.51

  • Added SLA message to Switchblade/Sidekick
  • Added 30Hz option for RED Touch 7" LCD
  • Added warning to Adaptive Preview/Quiet fan mode (DSMC2 only)
  • Added Canon EF-S 18-55mm f3.5-5.6 IS II
  • Added Tamron 28-300mm f3.5-6.3 Macro for Canon
  • Fix UI slider values when changed externally
  • Fix remaining time calculation in magnify mode
  • Fix media format failure with REDMOTE attached (DSMC only)
  • Fix Apple ProRes 4K 444XQ artifacts with 2K FF 1.3x Anamorphic at 120fps (DSMC2 only)
  • Fix Amps display in power dialog for ET Battery and V-Lock I/O Expander modules (DSMC2 only)
  • Fix color shift in playback with RED Touch 7" LCD (DSMC2 only)
  • Fix magnify in 3K formats (DSMC2 only)
  • Fix Base Expander distorted live audio after playback (DSMC2 only)
  • Fix HD-SDI sync at 50/59.94 FPS genlock input (DSMC2 only)
  • Fix Rear Analog Pre-Amp Gain displayed value (DSMC2 only)
  • Fix tearing on LCD after format change
  • Fix playback timeline when auto-hide menus enabled
  • Fix REDMOTE lockout when SLA is displayed (DSMC only)
  • Fix timelapse timer when frame count is larger than 1
  • Fix tint value for Auto White Balance
  • Fix message when REDVOLT battery installed in REDVOLT XL module
  • Improved Adaptive fan mode to protect against overheating in cool ambient temperatures (DSMC2 only)
  • Changed SCARLET-W camera ID (DSMC2 only)
  • Updated in-camera help files

OPERATIONAL NOTES SPECIFIC TO BUILD v6.2.55

  • ProRes only playback is not supported
  • Secure Format media before using Pre-Record.
  • Please perform an Auto-Cal after upgrading from v6.1.6.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM INC., All Rights Reserved

17.8 MB    




SCARLET-W Firmware

Release Date: 03/18/2016
Version: 6.2.51

DSMC Release Build v6.2.51 March 18, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.51.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.51.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.51.
  • You cannot downgrade a WEAPON CF to earlier than v6.1.44 or v6.2.25 after upgrading to v6.2.51.
  • You cannot downgrade a WEAPON MG or SCARLET-W to earlier than v6.2.44 after upgrading to v6.2.51.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the RED DSMC Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.2.51.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.2.51

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or RED STATION REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.44

  • Added RED RAVEN support
  • Added SCARLET-W Monochrome support
  • Added REDMOTE v9.5.36 (DMSC only)
  • Fix low power warning on Base I/O V-Lock Expander with non-RED batteries (DSMC2 only)
  • Fix intermittent battery status on Base I/O V-Lock Expander with IDX batteries (DSMC2 only)
  • Fix Brick 0% power source indicator and camera shutdown with AC adapter (DSMC2 only)
  • Fix intermittent ‘The media in the Side SSD is not formatted correctly…’ message on startup (DSMC2 only)
  • Fix Quicktime file import failure with Premiere (DSMC2 only)
  • Fix video stutter on monitor during record (DSMC2 only)
  • Fix artifacts in Quicktime file with 4K 6:5 and Lookaround On (DSMC2 only)
  • Fix Quicktime remaining record time (DSMC2 only)
  • Fix HD-SDI cutout in playback with genlock (DSMC2 only)
  • Fix no EVF image on startup attached to +1 Adaptor Module (DSMC only)
  • Fix Open Gate mode with 25 fps Project Frame Rate
  • Fix exposure change lockout in Open Gate
  • Fix camera freeze inserting media while playlist is open
  • Fix ISO 250 value displayed in UI slider
  • Fix color temperature not saved across boot
  • Changed maximum ISO to 3200 on UI slider
  • Changed WiFi connection failure message to informational popup
  • Updated in-camera help files

OPERATIONAL NOTES SPECIFIC TO BUILD v6.2.51

  • ProRes only playback is not supported
  • Secure Format media before using Pre-Record.
  • Please perform an Auto-Cal after upgrading from v6.1.6.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM, INC., All Rights Reserved

17.5 MB    




SCARLET-W Firmware

Release Date: 02/19/2016
Version: 6.2.44

DSMC Build v6.2.44 February 19, 2016

NOTE: Download the latest versions of REDCINE-X PRO and the RED ROCKET Installer or the RED ROCKET-X Installer from red.com/downloads.

IMPORTANT:

  • You cannot downgrade an EPIC MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.44.
  • You cannot downgrade an SCARLET MYSTERIUM-X to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.44.
  • You cannot downgrade an EPIC or SCARLET DRAGON to earlier than v5.3.49, v6.0.44 or v6.2.25 after upgrading to v6.2.44.
  • You cannot downgrade a WEAPON CF to earlier than v6.1.44 or v6.2.25 after upgrading to v6.2.44.
  • You cannot downgrade a WEAPON MG or SCARLET-W to earlier than v6.2.44 after upgrading to v6.2.44.
  • You must upgrade your REDMOTE firmware to v9.5.×. Download the firmware upgrade from red.com/downloads.
  • Refer to the RED DSMC Operation Guide, available at red.com/downloads, for REDMOTE upgrade instructions.
  • Preset files created only on v4.0.x or later are compatible with v6.2.44.
  • It can take the camera up to 8.5 minutes to update firmware for the RED Touch 7" LCD. The LCD displays a progress screen during the update. If your camera loses power during the update, turn your camera back on. The LCD upgrade restarts. During the upgrade, the LCD is blank and the PWR/REC LEDs flash green.

UPGRADE DSMC FIRMWARE TO v6.2.44

NOTE: User Preset, Look, and Custom Overlay files will be preserved across upgrades of v6.2.3 or later.

1. Connect an SSD (RED MINI-MAG or RED STATION REDMAG 1.8") to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the SSD as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the SSD. Change the Mount preference to Read-Write before attempting to copy firmware to the SSD.

2. Download the most recent firmware from www.red.com/downloads.

3. Unzip the firmware zip file.

4. Copy the force_upgrade folder and its contents to the top level of the SSD directory.

5. Eject or unmount the SSD, and then remove the SSD.

5. Ensure the camera is powered down and the REDMOTE is undocked.

6. Insert the SSD with the force_upgrade folder into your DSMC.

7. Power up the DSMC.

The upgrade automatically runs at power up.
During upgrade, the fans run at high speed and the PWR and REC LEDs flash green. After approximately 15 seconds, the LEDs stop flashing and the camera powers down. Nothing displays on the external monitors during the upgrade.

8. After the camera powers down, remove the SSD and wait 10 seconds.

9. Power up the camera.

The camera may take 30 seconds or longer to upgrade all the attached modules. During this time the PWR and REC LEDs flash green and nothing displays on the external monitors.

10. Go to Menu > Settings > Maintenance > System Status > Camera Info and verify that the firmware version listed matches the firmware version that you downloaded.

11. Reformat the SSD before recording to it.

SIGNIFICANT CHANGES SINCE PREVIOUS BUILD v6.2.25

  • Added WEAPON MG support
  • Added SCARLET-W support
  • Added REDMOTE v9.5.33
  • Added Horizon to the ‘Display’ preset group
  • Fix 0% power level with V-Mount and Gold Mount Battery modules (WEAPON only)
  • Fix QT file crashing Resolve/Premier (WEAPON only)
  • Fix elevated audio levels with Base Expander (WEAPON only)
  • Fix boot hang with active Genlock and Auto Cal (WEAPON only)
  • Fix video stutter during Weapon playback (WEAPON only)
  • Fix Enhanced A/F notification (Weapon only)
  • Fix HDRx state in network storage mode (EPIC DRAGON/WEAPON only)
  • Fix incorrect Ramp mode frame rate on startup
  • Fix Preset Create/Clone not functioning
  • Fix Switchblade/Sidekick operating mode during calibration
  • Fix blank HDRx setting on startup when enabled
  • Fix stale calibration info displayed in UI
  • Fix calibration error with active Genlock
  • Fix HD-SDI video disruption during start/stop record
  • Fix potential camera freeze using keyboard
  • Fix intermittent sync failure on startup
  • Fix sync loss when record is active
  • Fix incomplete UI dropdown lists after defaults restore
  • Fix 2K FF audio sync
  • Fix AF zone shifted to the right
  • Changed UI behavior for ACES
  • Improved Calibration Map Import notifications
  • Improved Motion Mount colorimetry

OPERATIONAL NOTES SPECIFIC TO BUILD v6.2.44

  • ProRes only playback is not supported
  • Secure Format media before using Pre-Record.
  • Please perform an Auto-Cal after upgrading from v6.1.6.
  • The horizon feature requires Gyro calibration be completed prior to use.
  • Do not 3D sync when GEN ICON is not illuminated or yellow.
  • Image Magnify is available during preview only.
  • HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

Copyright © 2016 RED.COM Inc., All Rights Reserved

16.9 MB