DSMC2 Jetpack-SDI Expander

SKU#: 720-0048

$1,250.00
Orders placed today are expected to ship in 4-6 weeks

The DSMC2® Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDI Expander provides a low-profile expander solution. The 3G-SDI connection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage.The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.



The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN® to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.



NOTE: Only one (1) expander module can be used at a time.

DSMC2 Jetpack-SDI Expander
DIMENSIONSHeight: 4.57 in. (116 mm)

Width: 3.54 in. (90 mm)

Depth: 1.46 in. (37 mm)
WEIGHT0.56 lbs (253.6 g)
MATERIALMagnesium
BRAIN MOUNTING4x M4 captive mounting screws
BRAIN CONNECTIONSPower delivery via WEAPON Rear pogo connector (13-Pin)

Communication via WEAPON Rear I/O connector (4x40 Pin)
CONNECTORSDC IN (6-Pin 1B LEMO socket)

3G-SDI output (75 _ BNC), 60 Hz max frame rate

Gigabit Ethernet input/output (9-Pin 0B LEMO)

Aux Power Output (2-Pin 0B LEMO), 1.5 A

SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)

CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
AUTO BOOT ON POWER2-position slider switch
OPERATING TEMPERATURE0°C to 40°C (32°F to 104°F)
STORAGE TEMPERATURE–20°C to 50°C (–4°F to 122°F)
OPERATING HUMIDITY0% to 85%, non-condensing
STORAGE HUMIDITY0% to 85%, non-condensing
FIRMWARE REQUIREMENTCompatible with all DSMC2 firmware v6.3 or later