The DSMC2® V-Lock Battery Module is a low profile cable-free module that enables you to power your DSMC2 BRAIN® and camera accessories using RED BRICK®, REDVOLT-V®, or other standard V-Lock batteries. The V-Lock mount and protected release button ensure ongoing power even during mobile shoots.
This DSMC2 battery module offers a P-Tap connector on top and an auxiliary port on the side for powering peripherals and accessories. Together the P-Tap and auxiliary connectors support a maximum combined current of 3.8 Amps.
This module also offers a DC-IN power port that can be used to power the camera system when the module is attached to the BRAIN. When DC-IN power is supplied to the module, and the camera is turned off, this module can also trickle charge the attached V-Lock battery.
Manufactured from robust aluminum alloy, this DSMC2 battery module offers a blend of utility and power support in a lightweight and space-saving form factor. The DSMC2 V-Lock Battery Module is an ideal power solution for use with most DSMC2 expanders. Alternatively, connect the DSMC2 V-Lock Battery Module directly to your DSMC2 BRAIN for a low-profile, battery-only power configuration.
DSMC2 V-LOCK Battery Module
|DIMENSIONS||Height: 4.57 in. (116.0 mm)|
Width: 4.06 in. (103.1 mm)
Depth: 1.51 in. (38.3 mm)
|WEIGHT||0.824 lbs (374 g)|
|BRAIN MOUNTING||4x M4 captive mounting screws|
|BRAIN CONNECTIONS||Power delivery via rear pogo connector (13-Pin)|
|CONNECTORS||DC IN (6-Pin 1B LEMO socket)|
P-Tap Aux Power output (2-Pin), 3.0A
Aux Power output (2-Pin 0B LEMO), 3.8 A shared
|BATTERY COMPATIBILITY||RED BRICK, REDVOLT-V, and other standard V-Lock batteries|
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|FIRMWARE REQUIREMENT||Compatible with all DSMC2 firmware v6.3.102 or later|
Tech specs reflect both current and projected information. Everything is subject to change.