The RED® Pro Touch 7.0" LCD offers a high-definition viewing experience for recording and viewing footage on your DSMC® or DSMC2® camera system. A 1920 x 1136 resolution display panel provides improved color accuracy, high pixel density (at 323 ppi), and 1000:1 contrast. It is also bright enough for operation in high ambient light. A robust, optically-bonded touchscreen provides the most intuitive way to navigate menus, adjust camera parameters, and review your .R3D clips directly out of the camera.
The lightweight display mounts to your BRAIN® or other 1/4-20 mounting surface and provides a 16-pin 1B LCD/EVF connection to connect to your camera. The RED Pro Touch 7.0" LCD is an ideal monitoring option for gimbals, cranes, and remote (away from the camera) viewing.
For DSMC2 shooters, use a DSMC2 LCD/EVF Adaptor A in conjunction with the RED Pro Touch 7.0" LCD for convenient mounting options away from the DSMC2 camera BRAIN. For a more ergonomic monitoring solution when you're on the move, see the DSMC2 RED Touch 7.0" LCD featuring a fully rotating and lay-flat hinge design.
RED PRO Touch 7.0" LCD
|DIMENSIONS||Height: 5.24 in. (133 mm)|
Width: 7.28 in. (185 mm)
Depth: 1.22 in. (31 mm)
|WEIGHT||1.10 lbs (549 g)|
|RESOLUTION||1920 × 1136|
|PIXEL DENSITY||323 pixels per inch (ppi)|
|REFRESH RATE||60 Hz|
|RESPONSE TIME||23 ms (black to white)|
|COLOR DEPTH||8-bit RGB, 4:4:4 progressive scan (16.7 million colors)|
|VIEWING ANGLE||± 85° all axes|
|DISPLAY ORIENTATION||Landscape, 180° rotation|
|TOUCH||Projected Capacitive (PCAP), multi-touch|
|BRAIN CONNECTION||Power and Communication via LCD/EVF cable|
|MOUNTING||23x 1/4-20 mounting points|
2x 3/8-16 mounting points
|HOOD MOUNTING||M3x0.5 × 5 mm (max depth)|
|BUTTONS||Up, Down, User 1, User 2|
|POWER CONSUMPTION||5.5 W (typical)|
|OPERATING TEMPERATURE||0°C to 40°C (32°F to 104°F)|
|STORAGE TEMPERATURE||–20°C to 50°C (–4°F to 122°F)|
|OPERATING HUMIDITY||0% to 85%, non-condensing|
|STORAGE HUMIDITY||0% to 85%, non-condensing|
|FIRMWARE REQUIREMENT||Compatible with all DSMC firmware v5.2.38 or later|
Tech specs reflect both current and projected information. Everything is subject to change.