Back to All Downloads

RED MINI-MAG 960GB V3 SSD


release history

Version 3.01.0

|

197 KB

Release Date:

5/14/2019

Release Notes

REDMINI-MAG 960GB V3 Firmware April 15, 2019

IMPORTANT:

  • Offload any data from the MINI-MAG before you upgrade it.
  • You must format your MINI-MAG before and after you upgrade it.

Upgrade REDMINI-MAG 960GB Firmware

NOTE: Offload any data from the MINI-MAG before you upgrade it.

1. Power up the camera, insert the REDMINI-MAG 960GB and format the MINI-MAG.

2. Properly eject the MINI-MAG from the camera.

3. Connect the MINI-MAG to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the MINI-MAG as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the MINI-MAG. Change the Mount preference to Read-Write before attempting to copy firmware to the MINI-MAG.

4. Unzip the file.

5. Copy the .rmf file to the top level of the MINI-MAG directory.

6. Eject or unmount the MINI-MAG, and then remove the MINI-MAG.

7. Insert the MINI-MAG with .rmf file into your camera and verify the MINI-MAG mounts properly.

8. Go to Menu > Settings > Maintenance > Upgrade > Media.

9. Select ‘Yes’ and verify that the operation completes without error.

10. Remove the MINI-MAG from the camera as instructed by the on-screen instructions.

11. Re-insert the MINI-MAG into the camera.

12. Go to Menu > Settings > Maintenance > System Status > Media Info and verify that the Media Firmware Revision is 0301-000.

13. Format the MINI-MAG before use.

Copyright © 2004-2019 RED.COMLLC. All Rights Reserved.

Version 9.29.0

|

197 KB

Release Date:

11/20/2017

Release Notes

REDMINI-MAG 960GB V3 Firmware November 20, 2017

IMPORTANT:

  • Offload any data from the MINI-MAG before you upgrade it.
  • You must format your MINI-MAG before and after you upgrade it.

Upgrade REDMINI-MAG 960GB Firmware

NOTE: The REDMINI-MAG 960GB requires that your camera is on firmware v6.3.75 or later.

NOTE: Offload any data from the MINI-MAG before you upgrade it.

1. Power up the camera, insert the REDMINI-MAG 960GB and format the MINI-MAG.

2. Properly eject the MINI-MAG from the camera.

3. Connect the MINI-MAG to your computer.

NOTE: On Mac computers with REDCINE-X PRO installed, RED Watchdog mounts the MINI-MAG as Read-Only by default, which means that you are unable to write files (including firmware upgrade files) to the MINI-MAG. Change the Mount preference to Read-Write before attempting to copy firmware to the MINI-MAG.

4. Unzip the file.

5. Copy the .rmf file to the top level of the MINI-MAG directory.

6. Eject or unmount the MINI-MAG, and then remove the MINI-MAG.

7. Insert the MINI-MAG with .rmf file into your camera and verify the MINI-MAG mounts properly.

8. Go to Menu > Settings > Maintenance > Upgrade > Media.

9. Select ‘Yes’ and verify that the operation completes without error.

10. Remove the MINI-MAG from the camera as instructed by the on-screen instructions.

11. Re-insert the MINI-MAG into the camera.

12. Go to Menu > Settings > Maintenance > System Status > Media Info and verify that the Media Firmware Revision is 0929-000.

13. Format the MINI-MAG before use.

Copyright © 2004-2017 RED.COMLLC. All Rights Reserved.