Back to All Downloads

V-RAPTOR XL 8K S35 FIRMWARE

release history

VERSION 1.6.2

|

208 MB

Release Date:

10/27/2023

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select Upgrade.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.5.4

  • Added Face Detection Beta for Auto Focus
  • Added In-camera Online Firmware Upgrade method
  • Added Advanced Playback Controls
  • Added RED Connect SMPTE ST 2110-22
  • Added RED Connect Return Feed (SMPTE ST 2110-20)
  • Added RED Connect NMOS support
  • Added multiple Calibration management
  • Added ISO Display Mode Gain (dB)
  • Added Remote Shutdown command
  • Added mDNS discovery via Camera Name
  • Added Web UI for S3 credentials
  • Added clipname to HANC data during playback
  • Added DSMC3 RED Touch 7" 5.5.0 firmware
  • Added DSMC3 RED Touch 7" GIO Scope Interface (5.5.0)
  • Added ability to disable DSMC3 RED Touch 7" Page System (5.5.0)
  • Added edit list functionality to DSMC3 RED Touch 7" (5.5.0)
  • Added OWC Atlas Ultra 1TB/2TB support
  • Added SanDisk PRO-CINEMA 640GB support
  • Fixed possible incorrect LUT on playback
  • Optimized RCP outgoing messages
  • Improved PTP locking
  • Improved playback transition on DSMC3 RED Touch 7" (5.5.0)

OPERATIONAL NOTES

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.5.4

|

201.2 MB

Release Date:

9/12/2023

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.5.2

  • Added DSMC3 RED TOUCH 7.0" FW 5.4.2
  • Fixed DSMC3 RED TOUCH 7.0" playback controls not showing
  • Fixed some batteries causing unexpected shutdowns

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.5.2

|

196.3 MB

Release Date:

6/7/2023

Release Notes

IMPORTANT

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy upgrade.bin to a /upgrade directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.4.4

  • Added support for RED RF TO PL ADAPTER W/ ELECTRONIC ND
  • Added RED Connect License support
  • Added ability to edit FPS, Shutter, and Format lists.
  • Added upcoming clip filename to SDI HANC while in preview
  • Added Format Dimensions status
  • Added RF Iris Compensation
  • Added ND control to assignable buttons list
  • Added ND Increments to Lens & Histogram Page
  • Added DSMC3 RED TOUCH 7.0" FW 5.4.1
  • Added RED Pro CFexpress 1TB support
  • Added Angelbird AV PRO CFexpress 1TB MK2 support
  • Added RED PRO 1TB support
  • Added OWC 1.3TB support
  • Added Prograde 1.3TB support
  • Added firmware update prompt and automatic restart
  • Added firmware update over USB Type-C
  • Fixed proxy timecode offset under certain formats
  • Fixed intermittent Gold Mount battery communication
  • Fixed Absolute Frame Guide when values are outside the format limits
  • Fixed R3D timecode mismatch in camera array
  • Fixed stuck pixels in 7K 3:2 1.6x/1.8x format
  • Fixed inconsistent Iris values on lens swap
  • Improved V-RAPTOR XL DC-IN power handling
  • Improved RCP2 CDL control
  • Improved Cloud Upload File Types menu
  • Improved ND Stop Display Mode
  • Improved External Only Audio over SDI
  • Improved Network Static IP setup
  • Improved DC IN low voltage warning interface

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.

VERSION 1.4.4

|

182.8 MB

Release Date:

2/23/2023

Release Notes

IMPORTANT

  • Download the latest REDCINE-X PRO from https://www.red.com/downloads

UPGRADE V-RAPTOR FIRMWARE

  1. 1. Copy the upgrade folder (containing the upgrade.bin file) to the top directory on the CFexpress card.
  2. 2. Power up the camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. 3. Go to Menu > Maintenance > Upgrade and select OK.
  4. 4. The camera starts the upgrade process which will automatically restart the camera.
  5. 5. After the camera restarts to complete the upgrade process, select RESTART once it appears.
  6. 6. Go to Menu > System Settings > System Status > Camera Info to verify the firmware version after the camera boots.

SIGNIFICANT CHANGES SINCE RAPTOR 1.4.2

  • Added Nextorage 660GB and 1.3TB support
  • Improved support for third party battery plates

OPERATIONAL NOTES

  • RED CONNECT is a license enabled feature, for more info see https://support.red.com/hc/en-us/articles/7391709361683
  • Calibration must be performed in Sensor Flip mode.
  • Some devices may experience intermittent connection issue over USB-C tethering.
  • Warning message will occur with unapproved Media and Batteries.

Copyright (c) 2004-2023 RED Digital Cinema, LLC. All Rights Reserved.