Shopping in United States?       Visit us.red.com

We have set cookies in your browser to help make this website better.

You can find more information about our use of cookies and how we protect your personal information in our   privacy policy .

Your web browser has problems displaying this site.

Make sure you are using the latest version of your browser or consider using   Download Google Chrome Google Chrome   Or   Download Mozilla Firefox Mozilla Firefox .


Release History


Download

REDmote Firmware

REDmote Firmware

Release Date: 02/12/2014
Version: 8.0.12

REDmote v8.0.12 Firmware February 6, 2014

IMPORTANT:

  • Please use the updated installers in the DSMC Resources package (Mac and Windows)
  • You will not be able to roll back to earlier firmware revisions than v2.0.13 after installing v8.0.5
  • Camera Firmware v5.1.6 or later is required to be functional.

Installation Instructions:

  • Windows instructions for manual network setup
    – Open Internet Protocol (TCP/IP) properties for the REDmote connection (RNDIS Gadget)
    – Select ‘Use the following IP Address’ and enter 192.168.0.1 with subnet mask 255.255.255.0. Click OK.
    – Click OK to apply and exit Network Properties.
    – Disconnect REDmote from the PC and wait 5 seconds.
    – Reconnect REDmote to the USB Port and wait for Network to indicate connection
    – Complete the REDmote Upgrade
    – Restore the DHCP setting for the Network Connection after upgrade is complete
    – Open Internet Protocol (TCP/IP) properties for the REDmote Connection (RNDIS Gadget)
    – Select ‘Obtain an IP Address Automatically’ and select OK.
    – Select Close to exit Network Properties.
    – Disconnect REDmote from the PC
    – Upgrade and system configuration is complete
  • Mac instructions for manual network setup
    – Go to your Network and find the device titled RNDIS/ÖGadget.
    – Select ‘Manually’, enter IP address 192.168.0.1 and Subnet Mask 255.255.255.0 and click Apply.
    – Start REDmote Upgrade Utility and upgrade.
    – Restore the DHCP setting after the upgrade is complete.
    – Go to your Network and find the device titled RNDIS/ÖGadget.
    – Select ‘Using DHCP’ and click Apply
    – Upgrade and system configuration is complete
  • Contact RED if you are unable to connect using the manual instructions (http://www.red.com/contact_us).

Significant changes since previous build v8.0.8:

  • Added focus distance selection for PL mount
  • Fix aperture output when PL mount is used

Operational notes specific to build v8.0.12:

  • None

Copyright © 2014 RED Digital Cinema, All Rights Reserved.

I have read and agree to RED's Terms and Conditions

  mac windows

REDmote Firmware

Release Date: 12/20/2013
Version: 8.0.8

REDmote v8.0.8 Firmware January 2, 2014

IMPORTANT:

  • Please use the updated installers in the DSMC Resources package (Mac and Windows)
  • You will not be able to roll back to earlier firmware revisions than v2.0.13 after installing v8.0.5
  • Camera Firmware v5.1.6 or later is required to be functional.

Installation Instructions:

  • Windows instructions for manual network setup
    – Open Internet Protocol (TCP/IP) properties for the REDmote connection (RNDIS Gadget)
    – Select ‘Use the following IP Address’ and enter 192.168.0.1 with subnet mask 255.255.255.0. Click OK.
    – Click OK to apply and exit Network Properties.
    – Disconnect REDmote from the PC and wait 5 seconds.
    – Reconnect REDmote to the USB Port and wait for Network to indicate connection
    – Complete the REDmote Upgrade
    – Restore the DHCP setting for the Network Connection after upgrade is complete
    – Open Internet Protocol (TCP/IP) properties for the REDmote Connection (RNDIS Gadget)
    – Select ‘Obtain an IP Address Automatically’ and select OK.
    – Select Close to exit Network Properties.
    – Disconnect REDmote from the PC
    – Upgrade and system configuration is complete
  • Mac instructions for manual network setup
    – Go to your Network and find the device titled RNDIS/…Gadget.
    – Select ‘Manually’, enter IP address 192.168.0.1 and Subnet Mask 255.255.255.0 and click Apply.
    – Start REDmote Upgrade Utility and upgrade.
    – Restore the DHCP setting after the upgrade is complete.
    – Go to your Network and find the device titled RNDIS/…Gadget.
    – Select ‘Using DHCP’ and click Apply
    – Upgrade and system configuration is complete
  • Contact RED if you are unable to connect using the manual instructions (http://www.red.com/contact_us).

Significant changes since previous build v5.0.12:

  • Dragon Support
  • Round up the REDCODE value (e.g., 10.35:1 shown as 11:1)
  • Close spinner when CONNECT menu, SETUP menu, LOCAL mode or REMOTE mode are activated
  • Added support for Yellow LAN indicator
  • Added additional record modes in the media slot
  • Fix unresponsive left nagivation key

Operational notes specific to build v8.0.8:

  • None

Copyright © 2013 RED Digital Cinema, All Rights Reserved.

I have read and agree to RED's Terms and Conditions

  mac windows

REDmote Firmware

Release Date: 04/08/2013
Version: 5.0.12

REDmote v5.0.12 Firmware April 8, 2013

IMPORTANT:

  • Please use the updated installers in the DSMC Resources package (Mac and Windows)
  • You will not be able to roll back to earlier firmware revisions than v2.0.13 after installing v5.0.12
  • Camera Firmware v4.0.0 or later is required to be functional.

Installation Instructions for REDmote v4.0.8 or later firmware:

  • Upgrading from v4.0.4 or v4.0.6 may require manual setup of the Network connection outlined below.
  • Windows instructions for manual network setup
    – Open Internet Protocol (TCP/IP) properties for the REDmote connection (RNDIS Gadget)
    – Select ‘Use the following IP Address’ and enter 192.168.0.1 with subnet mask 255.255.255.0. Click OK.
    – Click OK to apply and exit Network Properties.
    – Disconnect REDmote from the PC and wait 5 seconds.
    – Reconnect REDmote to the USB Port and wait for Network to indicate connection
    – Complete the REDmote Upgrade
    – Restore the DHCP setting for the Network Connection after upgrade is complete
    – Open Internet Protocol (TCP/IP) properties for the REDmote Connection (RNDIS Gadget)
    – Select ‘Obtain an IP Address Automatically’ and select OK.
    – Select Close to exit Network Properties.
    – Disconnect REDmote from the PC
    – Upgrade and system configuration is complete
  • Mac instructions for manual network setup
    – Go to your Network and find the device titled RNDIS/ÖGadget.
    – Select ‘Manually’, enter IP address 192.168.0.1 and Subnet Mask 255.255.255.0 and click Apply.
    – Start REDmote Upgrade Utility and upgrade.
    – Restore the DHCP setting after the upgrade is complete.
    – Go to your Network and find the device titled RNDIS/ÖGadget.
    – Select ‘Using DHCP’ and click Apply
    – Upgrade and system configuration is complete
  • Contact RED if you are unable to connect using the manual instructions (http://www.red.com/contact_us).

Significant changes since previous build v4.0.10:

  • Fixed Format slot so it shows correct current value
  • Fix REDCODE slot so it shows correct current value
  • Fix delayed updates when moving spinner
  • Fix FPS slot to update only when spinner is closed
  • Fix Monitor Mode slot to update only when spinner is closed
  • Fix REDmote labels to better match camera
  • Fix REDmote coming out of power save mode

Operational notes specific to build v5.0.12:

  • None

Copyright © 2013 RED Digital Cinema, All Rights Reserved.

I have read and agree to RED's Terms and Conditions

  mac windows

REDmote Firmware

Release Date: 10/17/2012
Version: 4.0.10

REDmote v4.0.10 Release Firmware October 17, 2012

IMPORTANT:

  • Please use the updated installers in the DSMC Resources package (Mac and Windows)
  • You will not be able to roll back to earlier firmware revisions than v2.0.13 after installing v4.0.10
  • Camera Firmware v3.3.0 or later is required to be functional.

Installation Instructions for REDmote v4.0.8 or later firmware:

  • Upgrading from v4.0.4 or v4.0.6 may require manual setup of the Network connection outlined below.
  • Windows instructions for manual network setup
    – Open Internet Protocol (TCP/IP) properties for the REDmote connection (RNDIS Gadget)
    – Select ‘Use the following IP Address’ and enter 192.168.0.1 with subnet mask 255.255.255.0. Click OK.
    – Click OK to apply and exit Network Properties.
    – Disconnect REDmote from the PC and wait 5 seconds.
    – Reconnect REDmote to the USB Port and wait for Network to indicate connection
    – Complete the REDmote Upgrade
    – Restore the DHCP setting for the Network Connection after upgrade is complete
    – Open Internet Protocol (TCP/IP) properties for the REDmote Connection (RNDIS Gadget)
    – Select ‘Obtain an IP Address Automatically’ and select OK.
    – Select Close to exit Network Properties.
    – Disconnect REDmote from the PC
    – Upgrade and system configuration is complete
  • Mac instructions for manual network setup
    – Go to your Network and find the device titled RNDIS/ÖGadget.
    – Select ‘Manually’, enter IP address 192.168.0.1 and Subnet Mask 255.255.255.0 and click Apply.
    – Start REDmote Upgrade Utility and upgrade.
    – Restore the DHCP setting after the upgrade is complete.
    – Go to your Network and find the device titled RNDIS/ÖGadget.
    – Select ‘Using DHCP’ and click Apply
    – Upgrade and system configuration is complete
  • Contact RED if you are unable to connect using the manual instructions (http://www.red.com/contact_us).

Significant changes since previous build v3.1.7:

  • Added audio indicators
  • Removed Zoom slot
  • Fix DHCP support for REDmote Upgrade Utility
  • Added support to display out-of-bounds REDcode values

Operational notes specific to build v4.0.10:

  • None

Copyright © 2012 RED Digital Cinema, All Rights Reserved.

I have read and agree to RED's Terms and Conditions

  mac windows

REDmote Firmware

Release Date: 06/14/2012
Version: 3.1.8

REDmote v3.1.8 Firmware June 14, 2012

IMPORTANT:

  • You will not be able to roll back to earlier firmware revisions than v2.0.13 after installing v3.1.8
  • Camera Firmware v3.2.x or later is required to be functional.

Installation Instructions for REDmote v3.1.8 firmware:

  • Please use installers (Mac and Windows) included in DSMC Resources package
  • Refer to the camera Operations Guide for installation details and upgrade procedures.

Significant changes since previous build v3.1.7:

  • Fix for Rig and Sync ICONs

Operational notes specific to Build v3.1.8:

  • None

Copyright © 2012 RED Digital Cinema, All Rights Reserved.

I have read and agree to RED's Terms and Conditions

  mac windows

REDmote Firmware

Release Date: 06/14/2012
Version: 2.0.14

REDmote v2.0.14 Firmware June 14, 2012

IMPORTANT:

  • You will not be able to roll back to earlier firmware revisions than v2.0.13 after installing v2.0.14
  • Camera Firmware v2.x or 3.0.x is required to be functional.

Installation Instructions for REDmote v2.0.14 firmware:

  • Please use installers (Mac and Windows) included in DSMC Resources package
  • Please refer to the Operations Guide included in download files for details and upgrade procedures.

Significant changes since build v2.0.13:

  • Fix for RIG and SYNC ICONs

Copyright © 2012 RED Digital Cinema, All Rights Reserved.

I have read and agree to RED's Terms and Conditions

  mac windows